Free online sound test for speakers, headphones and microphones

Test speakers, headphones and microphones, generate tones, sweeps and noise, check recording levels and troubleshoot sound problems. Nothing to install, and your audio stays on your device.

Quick sound check

Starts quietly. Raise your device volume slowly.

Phone speakers often play both sides from one speaker; use headphones.

Sound not working? Start here

All audio tests and tools

Read the method

Tool 01

Audio test

Confirm that your browser and output path can play a known reference.

Open test

Tool 02

Tone generator

Generate a controlled reference tone with explicit level and safety limits.

Open test

Tool 03

Left and right audio test

Check channel routing before moving into fault isolation.

Open test

Tool 04

Speaker test

Run a short, repeatable speaker check and record what you hear.

Open test

Tool 05

Headphone test

Check both sides and turn a failed result into a controlled next experiment.

Open test

Tool 06

Frequency sweep

Run a controlled sweep and record repeatable changes across the range.

Open test

Tool 07

Noise generator

Generate deterministic white, pink or brown noise locally.

Open test

Tool 08

Microphone test

Inspect digital level, waveform, spectrum, clipping and actual browser settings.

Open test

Tool 09

Audio normalizer

Adjust excerpt loudness locally while respecting estimated peak headroom.

Open normalizer

Tool 10

Bass and subwoofer test

Play low-frequency tones and sweeps, record what you hear and compare one change at a time.

Open test

Browser extension

Chrome and Edge extension to control tab audio and output device

WaveLocus Audio sends one tab to the speakers or headphones you choose, and adjusts its volume, EQ and balance on your computer.

  • Pick the device per tabLesson on headphones, music on speakers.
  • Boost, EQ and steady loudnessUp to 200% with a safety limiter.
  • Record 60 secondsCheck it with WaveLocus tools.
A browser tab's sound flowing to headphones instead of the laptop speakersVideo lessonCallMusicHeadphonesSpeakersWaveLocus Audio extension controls: output device, volume and feature tiles
A WaveLocus recording report sharing measurements, not audio, with ChatGPT, Claude or VS CodeRecording reviewnarration-take-2.wav · 0:48Sample peak−3.1 dBFSLoudness−19.4 LUFSFull-scale samples0Share reportAudio stays heremeasurements onlyChatGPTPeaks are safe.ClaudeLevel is 3 dB low.VS CodeNo clipping found.

AI assistant integration

Voice recording level check for ChatGPT, Claude and VS Code

Measure a voice recording in your browser, then share only the results with your assistant to interpret them. Your audio stays on your device.

  • Peak, loudness and clippingSample peak, LUFS, full-scale samples and DC offset.
  • You approve every shareThe assistant receives measurements, never audio.
  • Works where you already chatChatGPT app, Claude connector or VS Code MCP server.

How to troubleshoot audio problems in your browser

Three steps that turn “no sound” or “one side is quiet” into a clear next check.

Start a guided diagnosis
01

Choose the affected path

For missing speaker or headphone sound, start with the audio output test. For a silent microphone, check input permission and the selected device separately.

02

Record what you hear or see

Keep volume low. Note which channel is audible, whether the microphone meter follows speech, or when the sound drops out. A browser test checks the complete current path.

03

Repeat after one change

Change one output setting, connection or input selection, then repeat the same reference. Use the comparison to decide what to check next rather than guessing which component failed.

Changelog

What’s new in WaveLocus

New tools, improvements and fixes, published as they ship.

View changelogOpens on Headway